Noisy wiper blades can be a nuisance. At best they are just annoying and at worse they can become a tiring distraction.
Often noisy wiper blades don’t clear the windshield as well as they should so they can be dangerous too.
Thankfully there are some simple things that you can do to make your wipers quiet again.
First check that the wipers are not damaged or badly worn, if they are then they will need replacing. If they are in good condition then give them a really good clean with washing up liquid or a good quality detergent. Use hot water to soften the wiper blades for best results.
Check the wiper blades for damage and wear
You should be able to spot damaged wipers, often pieces are missing or loose. The most common cause of noisy wiper blades is damage or wear so this should be the first action that you take.
Clean the windshield and the wipers with soapy water
Use a good quality detergent, washing up liquid is the best.
Wipe off any excess with some kitchen roll or paper towel.
You don’t need to get every single speck of dirt off but you must make sure that there are no spots left behind otherwise they will score the windshield leaving unsightly streaks and scratches.
Even if your vehicle looks clean it is possible that small pieces of dirt and grit can remain on the windshield – these can cause the noise that you hear when the wipers operate – so give everything a really good clean.
Use some silicon spray wiper lubricant
This is a product that you spray onto the wiper blades. The product is designed to coat the wiper blades and reduce noise and friction caused by the wipers..
Do not use an oil-based lubricant as this will damage the rubber on the wipers – silicon spray is safe and does not leave any greasy marks or residue behind so it won’t make things worse.
[amazon box=”B08HZFB3JZ” template=”horizontal”]
Check if your windshield tracks are bent
If you have recently had work done on your car then there may be something wrong with the windshield tracks which can cause them to stick.
There are 2 small metal brackets either side of each wiper blade; they should point directly forwards towards where you want the wiper to go but if they are at an angle then they can stick and cause a lot of friction which will make the wiper blades noisy.
Can you use WD40 on wiper blades to make them quiet?
No, you should not use any form of oil or grease on wiper blades.
This type of product will eat the rubber in the blades which will shorten their lifespan.
It will also smear across your windshield and will be difficult to remove.
To recap – How to make wipers quiet.
- Check the wipers for damage
- Give everything a good clean with hot soapy water
- Replace the wipers if they need changing
Final Words
Wipers that are noisy and loud can be a major annoyance to drivers.
It’s important to find out what the problem is before you go about buying new wipers because it could just require some simple maintenance instead of an entire set of new blades.
If your wiper blades have been exposed to salt, dirt, road grime or even bird droppings then they may need more frequent cleaning than normal which will make them louder when in operation.
Read Next
- 10 Tent Camping Tips for Easy Camping
- 10 things you need to know before learning to scuba dive
- 15 places you must scuba dive in the world
- 7 Tips to Navigate the Delicate Art of Painting Your Side of a Neighbor’s Fence
- A Comprehensive Guide on How to Quiet a Metal Roof from Rain
- Are camping cots comfortable?
